bridge that does not cut your teeth or do not have?

When tooth extraction of the tooth is done, that “the bridge” (shaving the tooth the front and back which was pulled out in order to make the part which is lost original state recover, those which it puts, like the bridge it can connect) with it is general for putting ones which are called to be made.So as for truth, the fact that no one would like to shave the tooth anew probably is truth.Just it is possible, without shaving, the guide explains concerning the problematical point of the bridge which it makes.

After pulling out the tooth, the choices?

Generally after pulling out the tooth, as for the cure which is selected it is the following three mainly.

• Bridge
  When the tooth has lined up on front and back of the part which it pulled out, the both are put anew, putting ones like the kind of bridge which can connect 3 are installed.

• In plant
  Without shaving the tooth of both sides completely, the artificial dental root of titanium make the pad, is put on that in the part of the tooth which was pulled out the thing is installed.
• Dentures
  Without shaving the tooth of both sides completely, it does also the part which was pulled out that way, but the removal necessity becomes necessary.Furthermore the clasp like the wire which is called “the spring” because the dentures are locked becomes necessary.

Without shaving the tooth, the method of making the bridge

After pulling out, the tooth of both sides even a little not shaving, it is and wants n/a is actually a bridge may be made in the hope such2there are three.

• adhesive bridges
  literally, only a portion of the tooth pulled out to cut your teeth on both sides without, is said to be bonded to the tooth on both sides.

• inlay bridge
  just cut a little groove on both sides of the teeth, then to fit the metal, is a way to bridge the foundation of.

it looks like the bridge of a very attractive at first glance, unfortunately, is not very common either method.

the next page, problems and sumaseru bridge is not covered…… followed by.

problems and sumaseru bridge is not covered……

bridge using adhesive or, such as bridge and make a small cut to make it fit in the tooth to cover not cut, everyone is certainly very first joy. there is a possibility that joy does not last too long but.

• if the adhesive bridge
  parts are bonded (boundary between the teeth on both sides) is, early (few days~several months) in, come off, come loose. teeth would have been taken or adhesive.

• inlay bridge
  it is not immediately take off, either before or after the part has been fixed by inserting, come loose off. and unsound condition persists further, tooth decay can be fitted in the gaps of a certain part, large spread in the internal.

if you just simply side-by-side tooth, although these methods is also a valid, in fact, work force when the cam, many will come out that the problem is the durability is good looking.

the teeth are arranged in part pulled, force in the vertical direction at the time of bite, force such that when boiled grind, more sticky with food, force to attempt to remove the tooth movements exactly like pull up is automatically activated.

a similar force to the teeth on both sides will work the same way as further. pull the teeth and, i always take the power to try to pull hegaso. are considered at an early stage to get out relatively small area of the part is fixed to the left and right so.

therefore, at this time, cut both sides of the part even if it pulled out, has become common to ensure the durability of the bridge.

-related links-
cut too much~! cut back cavities take up where?
if you can not listen too late!why cut your teeth and bleeding?
teeth remain even after tooth extraction!? partial extraction of the tooth
if you can not listen too late?! once you leave the tooth pulled out…
if you can not listen too late! happens when we take the tooth nerve?
it disengages the teeth of metallic copper?
dental anesthetic did not work! why?